Jebao Eco-Pond Pump
up to 18.000 l/h (ATP 18000)
The Jebao pond pump of the ATP-Series can be employed to operate a skimmer (on the suction side of the pump), besides its conventional use as pond pump that supplies the filter.
Skimmer connection/ streaming/ fountain
The suction connection on the side cannot be used simultaneously with the water suction/inlet via the filter housing.
The pump conveys the pond water through the suction connection on the side, for example from the skimmer. In this case the pump can be installed out of the water, near the pond and under the water level.
If the suction through the filter basket/housing is required the lateral suction connection for the skimmer has to be removed. Then the pump sucks the pond water through the filter housing. The pump has on the suction and pressure side (inside the housing) a 1 1/2 inch external thread and can be used as filter/fountain or delivery pump for streamings.
 |
Technical data
|
| Type |
Jebao ATP18.000 |
| Size in mm |
350 x 310 x 145 |
| Input voltage |
230 Volt / 50Hz |
| Cable length |
10 m |
| Engine |
asynchronous motor with ceramic axle and bearing |
| Max. size of dirt particles |
6 mm |
| Max. pumping head |
6 m |
| Max. pump capacity |
18.000 l/h |
| Pump power input |
220 Watt |
| Outlets |
2 |
| Hose connections Ø (presusure side) |
25 / 32 / 38 / 50 mm |
| Hose connectionØ (Suction side) |
25 / 32 / 40 mm |
| Weight |
6,5 kg |
|
Delivery content
|
You will receive an Eco-pond pump (ATP 18000).
|
